Enphase 'Low Solar Production' Error: causes and what to do
"Low Solar Production" is the Enphase App error, shown as Production Issue to installers, raised when your system makes less energy than expected. Clouds or snow can trigger it while the system is working normally, and so can dirt, shade, a tripped breaker or a fault in one or more microinverters. Check the weather, look at the panels from the ground, and compare panels in the app's Array view; if a solar breaker has tripped, reset it once and watch for 24 hours. Do not climb onto the roof or clean the panels yourself, and ask for a diagnosis if the same panels keep underperforming on clear days.
Can wait
How common is this fault?
- We have seen this fault on 179 Enphase systems, 3.6% of the 4,999 Enphase systems we monitor (last 12 months, as of November 2026).
- Source: Otovo fleet monitoring and service records, data as of November 2026.
What causes this fault?
- Shade from trees or nearby structures. Enphase lists shading as a cause of reduced production.
- Weather, snow or dirt on the panels.
- One or more microinverters not reporting or not producing.
- High grid voltage that makes microinverters stop and resume.
- A panel or connector problem that a technician must test.
What can I safely try myself?
- Open the Enphase App Note which devices are affected and when production dropped.
- Compare days Compare a clear day now with a clear day from earlier. Weather alone can explain a lower day.
- Look from the ground Check for new shade or snow on the panels. Do not climb onto the roof or clean panels yourself.
- Check the gateway Make sure the gateway is reporting. Missing data can look like low production.
- Share what you saw Give the dates and the affected devices to your service provider.
When should I call a professional?
Call a professional if low production continues on clear days or if specific microinverters stay silent. Otovo services these systems and can diagnose this fault. Do not open equipment or touch wiring.
Frequently asked questions
- Is low production a safety problem?
- Not by itself, but a technician should look at it if it continues.
- Can shade alone explain it?
- Yes. Enphase lists tree or structure shading as a cause of reduced production.
- Should I clean the panels myself?
- Do not go on the roof. A professional can inspect and clean safely.
- What does the Enphase 'Low Solar Production' error mean?
- Enphase says it means the panels are not producing as much energy as they should. It can be weather, soiling or shade, or a microinverter or panel fault, which is why comparing panels in the Array view helps.
- Is 'Production Issue' the same as 'Low Solar Production'?
- Yes. Enphase shows the same condition as Production Issue in the Installer Portal and as Low Solar Production in the Enphase App.
Other Enphase faults
- Enphase 'DC Voltage Too Low': what it means and what to do
- Enphase 'Device failed to report': what it means and what to do
- Enphase gateway: not reporting — what it means and what to do
- Enphase 'Device produced no power': what it means and what to do
- Enphase 'Gateway Not Reporting' Error: how to get it back online
- Enphase 'Device Produced No Power': why and what to do
- Enphase 'AC Voltage Out of Range' (ACVOOR): causes and fixes
- Enphase 'AC Frequency Out of Range' (ACFOOR): what it means
- Enphase Battery Below Reserve Alert: what it means and what to do