Enphase 'AC Voltage Out of Range' (ACVOOR): causes and fixes
"AC Voltage Out Of Range", abbreviated ACVOOR by Enphase, means your microinverters measured the utility voltage outside the range they accept and paused production. Enphase notes utility voltage varies and the condition often corrects itself, so it is not an emergency. Note the time in the app, check whether production returns, and make sure the solar breakers are on, switching one on once only if it is off. Do not open any equipment; if it keeps coming back, ask your utility about the voltage at your home and contact a professional, because wiring, breaker or utility-transformer problems are possible causes.
Can wait
How common is this fault?
- We have seen this fault on 276 Enphase systems, 5.5% of the 4,999 Enphase systems we monitor (last 12 months, as of June 2026).
- Once it appears, the system usually clears it in about 752.4 hours (median), and 0% clear within 24 hours.
- Source: Otovo fleet monitoring and service records, data as of June 2026.
What causes this fault?
- The utility grid voltage in your area is temporarily above or below the allowed window.
- High grid voltage, outside the range the microinverters accept, can make them stop and resume repeatedly.
- A utility outage or switching event nearby.
- A wiring or AC branch circuit problem on the property, which only an installer can test.
What can I safely try myself?
- Note the alert Open the Enphase App and write down the alert text and the time it appeared.
- Check whether it is a one-off Look at your production graph. If production returns after a short pause, the grid has settled.
- Check the solar breaker Make sure the solar breakers are on. If one is off, switch it on once only. Do not open any panel cover.
- Check with the utility Enphase says to verify with your utility that the line voltage and frequency are in range. Ask whether there are outages or grid work in your area.
- Watch for a repeat If the alert returns, record the dates and times to give to your installer or service provider.
When should I call a professional?
Call a professional if the alert repeats on several days or production stays at zero after the grid is stable. Otovo services these systems and can diagnose this fault. Do not open any equipment or touch wiring.
Frequently asked questions
- Is this a fault in my solar system?
- Often not. A flashing red status light on a microinverter means the AC grid is absent or not within specification, which can come from the utility side.
- Who can I ask about the grid?
- Your electric utility. Enphase advises checking with the utility that the line voltage and frequency are in range.
- Can I change the limits myself?
- No. Only a qualified installer working with Enphase should review grid settings.
- Do I need to restart anything?
- No. Check the breaker once and wait. Do not repeatedly switch equipment on and off.
- What does ACVOOR mean on Enphase?
- ACVOOR is Enphase's short name for AC Voltage Out Of Range: a microinverter measured grid voltage above or below its allowed limits and stopped exporting until voltage returned to range.
- What voltage range do Enphase IQ8 microinverters accept?
- Enphase's IQ8 manual gives 211 to 264 volts line to line and 106 to 132 volts line to ground on standard 240-volt single-phase service. Only a qualified technician should measure this.
- Why is only one Enphase microinverter showing AC Voltage Out of Range?
- Enphase's troubleshooting guide says a single unit that stays out of range with consistent readings may have a failing microinverter, while several units at once usually point to wiring or utility voltage.
Other Enphase faults
- Enphase 'DC Voltage Too Low': what it means and what to do
- Enphase 'Device failed to report': what it means and what to do
- Enphase gateway: not reporting — what it means and what to do
- Enphase 'Device produced no power': what it means and what to do
- Enphase 'Low Solar Production' Error: causes and what to do
- Enphase 'Gateway Not Reporting' Error: how to get it back online
- Enphase 'Device Produced No Power': why and what to do
- Enphase 'AC Frequency Out of Range' (ACFOOR): what it means
- Enphase Battery Below Reserve Alert: what it means and what to do