SolarEdge 'No Communication With the Inverter': what to do
"No communication with the Inverter" is the SolarEdge monitoring alert raised when one inverter has not reached SolarEdge's servers for at least 3 hours. The cause is often your home network, but it can also mean the inverter is off, for example after a tripped breaker. Check your router and internet, look from a safe distance for the inverter's steady blue light, and make sure the solar breaker is on; if it is off, switch it on once only and do not keep resetting it if it trips again. Contact a professional if the inverter shows a red light or the alert does not clear.
Fix soon
How common is this fault?
- We have seen this fault on 1,161 SolarEdge systems, 13% of the 8,936 SolarEdge systems we monitor (last 12 months, as of October 2026).
- Once it appears, the system usually clears it in about 47.7 hours (median), and 5% clear within 24 hours.
- Source: Otovo fleet monitoring and service records, data as of October 2026.
What causes this fault?
- The home router, modem, or internet connection is down.
- The Wi-Fi network settings changed since the inverter was set up.
- The inverter is switched off, or its AC breaker is off, for example after a grid outage.
- The inverter has a fault and has stopped operating.
- A network firewall or filter is blocking the connection.
What can I safely try myself?
- Note the alert Open the SolarEdge monitoring app or portal and write down the exact alert text and the time it started. This helps a technician diagnose it faster.
- Check your internet Confirm your router and modem are on and that other devices can get online. If you recently changed your Wi-Fi password, router, or internet provider, the inverter may have lost its connection.
- Check the breaker Look at the solar or inverter circuit breaker in your main panel. If it is off, switch it back on once. Do not keep resetting it if it trips again.
- Look at the inverter lights From a safe distance, look at the status lights or screen on the inverter without opening anything. Note what they show so you can describe it to a technician.
- Wait and recheck Allow some time for the inverter to reconnect after any restart, then look at the app again. If the alert remains, contact a professional.
When should I call a professional?
Otovo services these systems and can diagnose this fault for you. Call if the inverter lights show a fault, if the breaker trips again, or if the alert has not cleared after your checks.
Frequently asked questions
- Does this alert mean the inverter is broken?
- Not necessarily. It means the platform cannot reach it. The inverter may be working but disconnected from your network.
- Should I switch the inverter off and on?
- Only use the inverter ON/OFF switch if a technician asks you to. Restarting your router is a safer first step.
- Will I lose energy credit while it is offline?
- This depends on how your utility and monitoring are set up. A technician can check your system's actual production.
- How long does SolarEdge wait before sending 'No communication with the Inverter'?
- SolarEdge states the alert is only triggered after at least 3 hours with no communication, so short Wi-Fi blips do not raise it.
- What is the difference between 'No communication with the Inverter' and 'No communication with the site'?
- The inverter alert means one inverter stopped reaching SolarEdge. The site alert means nothing at the property is reaching SolarEdge, which points more strongly at the internet connection itself.
Other SolarEdge faults
- SolarEdge "Inverter not producing - Energy Limit mode" alert: what it means
- SolarEdge "Battery connection error" alert: what it means
- SolarEdge "Battery - circuit breaker tripped" alert: what to do
- SolarEdge Grid Frequency Error (18x40, 18x43, 2x22, 2x23): fixes
- SolarEdge Error 18x86 (Isolation Fault): causes and what to do
- SolarEdge 'No Communication With Power Optimizer': what to do
- SolarEdge 'Inverter Production Issue Detected': what it means
- SolarEdge 'No Communication With the Site' Alert: what to do
- SolarEdge Error 3x6E (No Communication With the Meter): fix
- SolarEdge Error 18x37 / 18x38 (Grid Voltage): causes and fixes
- SolarEdge External Fan Fault (Fan Failure Warning): what to do
- SolarEdge Error 18xC (Arc Fault Detected): what to do now