SolarEdge "Battery - circuit breaker tripped" alert: what to do
This alert means the battery's circuit breaker tripped. SolarEdge warns that if the problem is not fixed the battery self-discharges and can drain to an unrecoverable state within several days, so act soon. SolarEdge's restart sequence involves the inverter, battery and disconnect switches and is for qualified installers. Note the alert details and call a professional.
Fix soon
How common is this fault?
- We have seen this fault on 28 SolarEdge systems, 0.3% of the 8,936 SolarEdge systems we monitor (last 12 months, as of October 2026).
- Source: Otovo fleet monitoring and service records, data as of October 2026.
What causes this fault?
- The battery's circuit breaker has tripped. The alert text states this directly.
- The alert includes an LG Energy Solution fault ID for the battery, which the manufacturer's support can use.
What can I safely try myself?
- Note the alert details Record the alert text, the time, the fault ID shown in it and the battery serial number it names.
- Do not work the breakers yourself SolarEdge's turn-off and turn-on sequence covers the inverter switch, DC levels, the battery breaker and disconnect switches, and the AC supply. Leave it to a qualified installer.
- Call a professional promptly SolarEdge says that if the breaker trips again the battery should be turned off to avoid self-discharge and the battery manufacturer's support contacted. Have your installer or service provider handle this.
When should I call a professional?
Call a professional promptly, because SolarEdge warns the battery can drain to an unrecoverable state within several days if this is not fixed. Otovo services these systems and can diagnose this fault for you. Do not operate the battery's breakers or switches yourself.
Frequently asked questions
- Why is this urgent?
- SolarEdge notes that if the issue is not fixed the battery will self-discharge and can fully drain to an unrecoverable state within several days.
- Can I just switch the breaker back on?
- SolarEdge's documented sequence powers the whole system off and on in a set order and is written for installers. Do not do it yourself.
- What if it trips again?
- SolarEdge says to turn the battery off to avoid self-discharge and contact the battery manufacturer's support. A qualified installer should do this.
Other SolarEdge faults
- SolarEdge "Inverter not producing - Energy Limit mode" alert: what it means
- SolarEdge "Battery connection error" alert: what it means
- SolarEdge Grid Frequency Error (18x40, 18x43, 2x22, 2x23): fixes
- SolarEdge Error 18x86 (Isolation Fault): causes and what to do
- SolarEdge 'No Communication With Power Optimizer': what to do
- SolarEdge 'Inverter Production Issue Detected': what it means
- SolarEdge 'No Communication With the Site' Alert: what to do
- SolarEdge Error 3x6E (No Communication With the Meter): fix
- SolarEdge 'No Communication With the Inverter': what to do
- SolarEdge Error 18x37 / 18x38 (Grid Voltage): causes and fixes
- SolarEdge External Fan Fault (Fan Failure Warning): what to do
- SolarEdge Error 18xC (Arc Fault Detected): what to do now