Panel Cleaning · Texas Call us Mon–Fri, 8am–6pm CT
Home with rooftop solar panels

Warranty-safe methods. Before and after photos.

Solar Panel Cleaning in Texas— Done Properly, Not Pressure-Washed

Dirty panels don't fail, they just quietly make less. Most homeowners find out from the bill rather than the roof.

We clean residential and commercial solar arrays across Texas. Dirt, dust, pollen, and bird droppings removed with methods that protect the panel coating, and photographed before and after.

Rather talk to someone? Mon–Fri, 8am–6pm CT.

Get a cleaning quote

Tell us about your array and we'll come back with a price and availability. No obligation, and nothing gets scheduled until you say so.

Warranty-safe cleaning methods

Licensed, insured, and qualified technicians

Before and after photos for your records

When To Clean

When a cleaning is actually worth booking

Rain doesn't clean panels the way people assume. It moves dust around and leaves the stubborn things behind. These are the cases where cleaning makes a visible difference.

Heavy pollen or dust seasons

A film builds up over weeks and doesn't wash off, especially on low-pitch arrays where nothing runs off cleanly.

Bird droppings

Concentrated spots that shade individual cells and bake on hard. These are the ones rain never removes.

Sprinkler overspray

Hard-water spotting and mineral scale along the lower edge of the array, common on single-story roofs.

After storms or wildfire smoke

Grit, ash, and debris left across the array after a hailstorm.

After construction or roof work

Dust and residue from a roof replacement, a remodel, or nearby building work.

Production has slipped

Output is down and nothing in the monitoring suggests a fault. Cleaning is the cheap thing to rule out first.

What's Included

What a solar cleaning service includes

Every roof is different, so cleaning is quoted per system. Array size, roof pitch, and access all affect the price, and you get the number before we schedule anything.

  • Removal of dirt, dust, pollen, and debris
  • Bird droppings and stubborn stain treatment
  • Gentle washing that protects the panel coating
  • Before and after photos for your records
  • A visual check of panels and racking while we're up there

We don't pressure-wash panels or use abrasive products. Both can damage the anti-reflective coating and put your panel warranty at risk.

Get a cleaning quote

How It Works

Three steps, no runaround

Tell us about your array

Call us or fill out the form with your address and roughly how many panels you have. We'll confirm the price and availability.

We clean the array

Gentle washing across every panel, with attention to droppings, scale, and anything baked on. Nothing abrasive, nothing pressurized.

You get the photos

Before and after shots of the array, plus anything we noticed about the panels or racking while we were on the roof.

Documented, Start to Finish

A cleaning you can check

We look at the array first, clean it properly, and leave the mounts as we found them.

Tree-lined street of brick-and-siding homes with rooftop solar in a Texas neighborhood
We check the array before anything gets touched.
Otovo service van on the way to a visit
Trucks stocked for the work, not just the diagnosis.
Close-up of solar panels and mounting rails on a tile roof
Panels and mounts left as they should be.

Service Area

Where we clean in Texas

Statewide coverage

We serve homeowners across Texas. Not sure your address is covered? Add your ZIP to the form and we'll confirm.

FAQ

Before you book a cleaning

It depends entirely on where you live and what's around you. Arrays under trees, near farmland, or under a sprinkler's reach need it far more often than an exposed roof in a clean, rainy area. If output has slipped and there's no fault, cleaning is the cheap thing to check first.

Partly. Rain shifts loose dust but leaves pollen film, hard-water scale, and bird droppings behind, and those are the deposits that shade cells.

It's quoted per system. Array size, roof pitch, and access all affect the price. Send us your address and panel count through the form and we'll come back with a number before anything gets scheduled.

Not the way we do it. We use gentle washing that protects the panel coating and avoid pressure washing and abrasives, which are the two things most likely to cause a problem.

Yes. Send us the site details through the form and we'll quote it.

Usually not, as long as we have roof access and can reach an outdoor water source. We'll confirm what we need when we book.

We'll tell you and show you photos. If it needs a proper diagnostic, that's a system inspection, quoted separately at $299. We won't repair anything you haven't approved.

Get your panels clean again

Fill out the form or give us a call, and we'll come back with a price.

Otovo serves 60,000+ customers across 16 countries in Europe and the United States.

Solar, battery, and generator service in Texas.

Otovo Care™ members save $50* on their first inspection.

© 2026 Otovo. Solar, battery, and generator service in Texas.

*$50 off one service visit, one time only. Limited to one per household.