# Enphase gateway: not reporting — what it means and what to do

The Enphase cloud has stopped receiving data from your IQ Gateway. That usually points to a connection or power problem at the gateway rather than panels that have stopped working. It is not urgent, but it is worth fixing so monitoring and alerts work. Start by checking that other devices in your home are online, then look at the gateway's network light.

## How common is this fault?

- We have seen this fault on 544 Enphase systems, 10.9% of the 4,999 Enphase systems we monitor (last 12 months, as of November 2026).
- Source: Otovo fleet monitoring and service records, data as of November 2026.

## What causes this fault?

- The home Wi-Fi network name or password changed, or the router was replaced.
- The home internet connection or router is down.
- The wireless signal is weak: Enphase notes that metal enclosures and obstructions block it, and that a wireless repeater may be needed when the gateway cannot hold a connection.
- The gateway is not powered, for example because its breaker inside the combiner box is off.
- The gateway itself has failed, which only an installer can confirm.

## What can I safely try myself?

1. **Check your internet** Confirm that other devices in the home can get online. If the internet is down, restart your router as its maker describes.
2. **Look at the gateway's network light** Enphase describes the Network communications light (the left-most one) as solid green when the gateway is connected to the Enphase App. On gateways in a combiner box it can show red when the gateway has no connection, and on older units solid amber means a local network only and off means no network. Look at the lights without opening anything.
3. **Reconnect it if the Wi-Fi changed** Enphase says that after a router is replaced, the gateway's Wi-Fi settings must be updated to the new network name and password. Its owner's guide says the gateway can be reconnected to the Enphase App by Wi-Fi, wired Ethernet or a cellular network. If you cannot do this from the Enphase App, ask your installer.
4. **Check the gateway breaker only if you can see it safely** Enphase's owner's guide tells owners to confirm that the gateway breaker inside the combiner box is on. Do this only if the breaker is already visible without opening a cover or tool-secured door. If it is off, switch it on once. If you cannot see it, or it is off again later, leave it and call a professional.

## When should I call a professional?

Call a professional if the gateway's network light is still not green after your router and Wi-Fi checks, if the gateway breaker keeps switching off, or if the alert lasts a day or more. Otovo services these systems and can diagnose this fault. Do not open the gateway, the combiner box or any enclosure.

## Frequently asked questions

### Is my solar system still producing?

Often yes. The alert means data is not reaching Enphase, not necessarily that the panels have stopped. Check your electricity meter or ask your installer to confirm.

### Why did it start after I changed my router?

The gateway keeps the old Wi-Fi network name and password. A new router or a changed network means the gateway's settings must be updated.

### Can I use a cable instead of Wi-Fi?

Enphase says the gateway can connect by Wi-Fi, wired Ethernet or a cellular network, depending on your system. Your installer can tell you which options yours supports.

### Does a gateway fault affect my battery?

For IQ Battery 3, 3T, 10 and 10T, Enphase states the batteries will not discharge while on the grid if the gateway is not powered or has failed. If you have a battery, resolve the gateway fault promptly.

Canonical page: https://otovo.com/repair/enphase/gateway-not-reporting
