# Enphase 'DC Voltage Too Low': what it means and what to do

Enphase says this event is usually normal in low light, at dawn and dusk. The microinverter is reporting that the voltage coming from its panel is too low. If it does not clear in full daylight, the panels may be heavily shaded or covered in snow. It is not urgent. Check from the ground for snow or shade, and call a professional if it keeps happening in full daylight.

## How common is this fault?

- We have seen this fault on 113 Enphase systems, 2.3% of the 4,999 Enphase systems we monitor (last 12 months, as of August 2026).
- Source: Otovo fleet monitoring and service records, data as of August 2026.

## What causes this fault?

- Low light at dawn, dusk or in poor weather. This is the usual, harmless reason.
- Panels that are heavily shaded or covered by snow.
- A panel and microinverter that are not compatible, which Enphase says to check if the event appears and clears daily during full daylight. Only an installer can check this.

## What can I safely try myself?

1. **Note the time of day** If the event appears early or late in the day and clears when the sun is up, Enphase says this is usually normal and needs no action.
2. **Look at the panels from the ground** Check for snow, leaves or new shade over the panels. Do not climb on the roof or sweep snow off the panels yourself.
3. **Check again in full daylight** Open the Enphase App around midday and see whether the event cleared. If it clears on its own, no action is needed.

## When should I call a professional?

Call a professional or Enphase if the event is still present in full daylight, or if it appears and clears every day or often during full daylight. Enphase says to contact your installer in those cases, and a compatibility check of the panel and microinverter is an installer task. Otovo services these systems and can diagnose this fault. Never touch DC wiring or open panels or microinverters.

## Frequently asked questions

### Is DC Voltage Too Low dangerous?

No. It is a status event reporting low voltage from the panel, not a sign of a hazard. Do not touch wiring or equipment.

### Why does it show at dawn and dusk?

Enphase says this is usually a normal condition during hours of low light and at dawn and dusk.

### What is DC voltage?

It is the direct-current electricity that comes from a solar panel into its microinverter, before the microinverter converts it to the AC electricity your home uses.

### Can I reset it?

Enphase lists no homeowner reset for this event. The documented action is to let it clear, and to contact your installer if it does not.

Canonical page: https://otovo.com/repair/enphase/dc-voltage-too-low
