
One-year workmanship warranty.
Solar Panel Critter Guard Installation in North Carolina— Close the Gap Under Your Array
The space between your panels and the roof is dry, shaded, and warm. Birds and rodents find it long before you do.
We install critter guard on residential solar arrays across North Carolina. It's secured around the full perimeter, so there are no gaps left, and it doesn't block the airflow your panels need.
Rather talk to someone? Mon–Fri, 8am–6pm ET.
Get a critter guard quote
One-year workmanship warranty on the installation
Licensed, insured, and qualified technicians
Airflow and panel cooling kept intact
Signs You Need It
What homeowners notice first
Nobody books critter guard preventively. It's almost always because something has already moved in, and the damage under an array is usually further along than it looks from the ground.
Noise under the panels
Scratching or scrabbling early in the morning, usually squirrels or nesting birds using the array as shelter.
Droppings down the wall
Streaking on the roof, gutters, or the side of the house directly below the array.
Chewed DC wiring
Rodents go for the cable runs. This is the one that costs money, and it usually shows up as a string that's stopped producing.
Nesting material and debris
Twigs, insulation, and leaf litter packed into the gap, which traps moisture against the roof.
Repeat repairs
You've already had wiring repaired once and nothing was done about what caused it.
Roof damage underneath
Shingle wear and lifted material where animals have been working at the roof surface under the panels.
What's Included
What critter guard installation includes
Critter guard is quoted per system. Array size, perimeter length, roof pitch, and access all affect the price, and you get the number before anything is scheduled.
- High-quality critter guard materials
- Expert installation around all solar panels
- Secure attachment to prevent gaps
- Protection against birds, squirrels, and rodents
- Airflow and panel cooling maintained
- Post-installation inspection and cleanup
- One-year workmanship warranty
Why The Fit Matters
A gap anywhere is a gap everywhere
Critter guard only works if the perimeter is continuous. Animals find the one unsecured section, and a partial install just moves the entry point.
No gaps left
Material is secured around the full array perimeter, not just the visible front edge.
Airflow preserved
Spaced so panels still get the airflow they need to run cool. Restricting it would cost you production.
Checked and cleaned up
Debris cleared and the install inspected end to end before we leave the site.
How It Works
Three steps, no runaround
Tell us what you're seeing
Call us or fill out the form with your address, panel count, and what's been happening up there. We'll confirm the price and availability.
We install the guard
Material fitted around the full array perimeter and secured so there's nothing left to squeeze through, without restricting airflow.
We clean up and inspect
Debris cleared, the install checked end to end, and a one-year workmanship warranty on the work.
Documented, Start to Finish
Closed off properly
We check every gap, close them, and leave the array the way we found it.



Service Area
Where we install critter guard in North Carolina
We serve homeowners across North Carolina. Not sure your address is covered? Add your ZIP to the form and we'll confirm.
FAQ
Common questions about critter guard
It closes the gap between your panels and the roof so birds and rodents can't get underneath. That's where they nest, and it's where the DC wiring runs.
Same thing. Mesh, critter guard, and bird screen all describe the barrier that closes the gap between your panels and the roof.
It's quoted per system. Array size, perimeter length, roof pitch, and access all affect the price. Send your address and panel count through the form and we'll come back with a number.
No. The install maintains the airflow under the array. Restricting it would cost you production, which defeats the point.
Yes. Critter guard installation comes with a one-year workmanship warranty.
We'll show you what we find. Chewed wiring and failed strings need a proper diagnostic before repair, which is a system inspection at $299. Nothing gets repaired until you approve the quote.
They need to be gone before the guard goes on, or you seal them in. If we find an active nest, we'll tell you and you'll need wildlife removal first. We don't do animal removal ourselves.
We install on most residential systems regardless of who put them up. Send your details through the form and we'll confirm.
Keep them out from under there
Fill out the form or give us a call, and we'll come back with a price.
Otovo serves 60,000+ customers across 16 countries in Europe and the United States.
Solar, battery, and generator service in North Carolina.
Otovo Care™ members save $50* on their first inspection.
© 2026 Otovo. Solar, battery, and generator service in North Carolina.
*$50 off one service visit, one time only. Limited to one per household.